Volant Ram User Manual
Page 2
3. Remove engine shroud. Pull it up off the rubber
grommets and away from the hooks.
4. Unscrew the 4 bolts from the throttle body using a
5/16 or 10mm socket.
5. Insert the o ring onto the Volant Vortice then
install the spacer into the intake manifold.
Make sure the o ring is on the top side.
6. Reinstall the stock throttle body, engine cover
and air duct DO NOT OVER TIGHTEN THE
BOLTS ON THE THROTTLE BODY
Thank you for purchasing our Vortice throttle body spacer. Visit our website at
www.volant.com to see our newest product for your vehicle