Voodoo Lab Pedal Power 2 Plus - Manual (Page 12)

If you are unsure which Pedal Power output and setting to use, or
whether an effect can be powered by your Pedal Power, try search-
ing our forum at www.voodoolab.com/forum.
Specifications
Input: IEC connector
120V 50/60Hz (North America model)
100V 50/60Hz (Japan model)
230V 50/60Hz (Europe/Australia model)
Model and input power are marked on the bottom of unit.
Outputs: 5.5x2.1mm barrel connectors center negative
Short circuit protected.
DIP Switch: NORMAL
Output DC Voltage Max current
1-4 (ACA) 9V 100mA
5-6 (L6) 9V 250mA
7-8 (SAG) 9V 100mA
DIP Switch: ON
Output DC Voltage Max current
1-4 (ACA) 12.3V 60mA
5-6 (L6) 14.5V / 12V (unregulated) 50mA / 200mA+
7-8 (SAG) Adjustable 4V - 9V 100mA
Physical: 6.0" wide x 3.4" deep x 1.75" tall (152x86x45mm)
Weight 2 lbs. (0.9 kg).
Special: Toroidal power transformer.
Auxiliary AC outlet, 200 watts max.