29 m3 wl settings – total values – total ride time – VDO M3WL User Manual

Page 29

M3 WL

Settings – total values – total ride time

You can set the total ride time on the VDO M3 WL.
E.g. you can set your total ride time (cumulative ride time
for all trips) at the start of the new cycling season).
You can set the values separately for bike 1 and bike 2.

ATTENTION:

the M3 WL has a data memory.

No data is lost when the battery is replaced.

How to set the total ride time:

Press and hold the SET button until the settings menu
opens.
Press the

BIKE button to switch from Totals to Settings.

Press the

SET button to open the settings.

“Language” appears on the display.

Press the

BIKE button to scroll to the setting for the

Total Time.

Press the

SET button to open the setting for the Total Time

(total ride time).

Press the

BIKE button to select whether you want to set the

total time

for

bike 1 or bike 2.

Press the

SET button to confirm the selection.

The

left digit

of the

hours setting flashes

and is ready

to be set.
Press the

BIKE button to set the value for this digit.

Press the

SET button to confirm your setting.