VDO M1WR - Manual (Page 16)

16
M1 WR
“Language” appears on the display.
Press the
BIKE button to scroll to the setting for the speed
indicator.
“Auto Speed” appears on the display.
Settings – speed indicator settings
To access the setting, press the SET button.
The setting opens.
“OFF” means that the speed is NOT automatically shown on
the display again after a few seconds.
Press the BIKE button to change the setting to “ON”.
ON means that the speed indicator will automatically be
displayed after a few seconds when in any other display
function.
Press the SET button to confirm the setting.
The response “Set Ok” appears on the display.
If you want to configure further settings,
press the
BIKE button to access these.
If you do not want to configure any other settings,
press and hold the SET button.
The settings menu closes.
The VDO M1 WR returns to function mode.
Here, you can set whether the speed indicator should
automatically be displayed after a few seconds when
in any other display function.
This is done as follows:
Press and hold the SET button until the settings menu
opens.