VAC Phi 2.0 Master Control Preamplifier User Manual
Page 12
11
REMOTE CONTROL
The remote control allows for wireless adjustment of POWER, SELECTOR, TAPE MONITOR,
CINEMA, MUTE, and VOLUME.
The remote wand is powered by two "AAA" batteries. These should be of the alkaline type.
You will need to install them in the wand before using the remote. Since batteries can leak,
they should be removed from the wand if it is not going to be used for an extended period
of time.
To install or change batteries, first loosen the screw on the
back of the remote.
Loosen the battery cover.
Remove the battery cover.
Insert two AAA batteries, observing the polarity diagram
inside th battery compartment.
Reassemble the remote control by following these steps in reverse.