Introduction, Package contents, Installation requirements – Ubiquiti Networks UniF AP AC User Manual
Page 2

Introduction
Thank you for purchasing the Ubiquiti Networks® UniFi®
Enterprise WiFi System. This system includes the UniFi
Controller software, which allows you to manage your wireless
network using a web browser. The software and User Guide
are available for download at: downloads.ubnt.com/unifi
This Quick Start Guide includes the warranty terms and is for
use with the UniFi AP-AC, model UAP-AC.
Package Contents
UniFi AP AC
Mounting Bracket
Ceiling Backing Plate
Flat Head Screws
(M3x50, Qty. 4)
Keps Nuts
(M3, Qty. 4)
Screws
(M2.9x20, Qty. 4)
Screw Anchors
(M3x20, Qty. 4)
Enterprise WiFi System
Model: UAP-AC
Gigabit PoE Adapter
(48V, 0.5A Gigabit)
Power Cord
Quick Start Guide
Installation Requirements
• CAT5/6 cable
• Phillips screwdriver
• Drill and drill bit (6 mm for wall-mounting or 3 mm for
ceiling-mounting)
• Optional: Drywall or keyhole saw (to cut 25 mm hole for
Ethernet cable feed)
TERMS OF USE: All Ethernet cabling runs must use CAT5 (or above). It is the customer’s
responsibility to follow local country regulations, including operation within legal frequency
channels, output power, indoor cabling requirements, and Dynamic Frequency Selection
(DFS) requirements.