Ubiquiti Networks UniF AP - Manual (Page 2)

Introduction
Thank you for purchasing the Ubiquiti Networks ™ UniFi®
Enterprise WiFi System. This system includes the UniFi
Controller software, which allows you to manage your wireless
network using a web browser. The UniFi Controller software is
available for download at downloads.ubnt.com/unifi
This Quick Start Guide includes the warranty terms and is for
use with the UniFi AP‑PRO, model: UAP‑PRO.
Installation Requirements
• CAT5/6 cable
• Phillips screwdriver
• Drill and drill bit: 6 mm (1/4") for wall-mounting or 3 mm (1/8")
for ceiling‑mounting
• Optional: Drywall or keyhole saw to cut 25 mm (1 in) hole for
Ethernet cable feed
Package Contents
UniFi AP‑PRO Mounting Bracket Ceiling Backing Plate
Flat Head Screws
(M3x50, Qty. 3)
Keps Nuts
(M3, Qty. 3)
Screws
(M2.9x20, Qty. 3)
Screw Anchors
(M3x20, Qty. 3)
Enterprise WiFi System
Models: UAP-PRO
PoE GigE Adapter
(48V, 0.5A Gigabit)
Power Cord Quick Start Guide
TERMS OF USE: All Ethernet cabling runs must use CAT5 (or above). It is the customer’s
responsibility to follow local country regulations, including operation within legal frequency
channels, output power, indoor cabling requirements, and Dynamic Frequency Selection
(DFS) requirements.