Installation requirements, Hardware installation – Ubiquiti Networks airMA Omni Antenna User Manual
Page 3
Installation Requirements
• RocketM2 (sold separately)
• 13 mm wrench
• Shielded Category 5 (or above) cabling should be used for
all wired Ethernet connections and should be grounded
through the AC ground of the PoE.
We recommend that you protect your networks from the
most brutal environments and devastating ESD attacks
with industrial-grade shielded Ethernet cable from Ubiquiti
Networks. For more details, visit www.ubnt.com/toughcable
Hardware Installation
1. Attach the RF Cables to the connectors labeled Chain 0 and
Chain 1 on the RocketM.