Installation requirements, Hardware overview – Ubiquiti Networks RocketDis Antenna User Manual
Page 3

Installation Requirements
• RocketM3/M3 GPS or RocketM365/M365 GPS (sold
separately)
• Phillips #1 screwdriver
• 16 mm or 5/8 in. wrench
• 24 mm wrench
• Shielded Category 5 (or above) cabling should be used for
all wired Ethernet connections and should be grounded
through the AC ground of the PoE.
We recommend that you protect your networks from the
most brutal environments and devastating ESD attacks
with industrial-grade shielded Ethernet cable from Ubiquiti
Networks. For more details, visit www.ubnt.com/toughcable
Hardware Overview
Fully Assembled Back View
Elevation Rod
Main Mounting Bracket
Pole Clamp
Pole Clamp
Protective Shroud
Stabilizer Brackets