Ubiquiti Networks RockeM - Manual (Page 2)

Introduction
Thank you for purchasing the Ubiquiti Networks ™ Rocket ™ M
Titanium. This Quick Start Guide is designed to guide you
through installation and show how to access the airOS
™
Configuration Interface. This guide also includes the warranty
terms and is for use with the RocketM2 Titanium, model
RM2‑Ti, and RocketM5 Titanium, model RM5‑Ti.
Package Contents
RocketM Titanium Gigabit PoE Adapter
(48V, 0.5A)
Power Cord
Carrier Class airMAX ™ BaseStation Models: RM2-Ti, RM5-Ti
Metal Strap GPS Patch Antenna (RM5‑Ti only) Quick Start Guide
Installation Requirements
• GPS antenna (RM5‑Ti only) must have a clear line of sight
to the sky.
• Shielded Category 5 (or above) cabling should be used for
all wired Ethernet connections and should be grounded
through the AC ground of the PoE.
We recommend that you protect your networks from the
most brutal environments and devastating ESD attacks
with industrial‑grade shielded Ethernet cable from Ubiquiti
Networks. For more details, visit www.ubnt.com/toughcable
TERMS OF USE: Ubiquiti radio devices must be professionally installed. Shielded Ethernet
cable and earth grounding must be used as conditions of product warranty. TOUGHCable is
designed for outdoor installations. It is the customer’s responsibility to follow local country
regulations, including operation within legal frequency channels, output power, and Dynamic
Frequency Selection (DFS) requirements.