Ubiquiti Networks PowerBridgM - Manual (Page 10)

Powering the PowerBridgeM
The PowerBridgeM can be powered by the included PoE
Adapter or any of the following compatible PoE switches:
• TOUGHSwitch PoE, model TS-5-POE
• TOUGHSwitch PoE PRO, model TS-8-PRO
• EdgeRouter PoE, model ERPoe-5
Connecting to the PoE Adapter
1. Connect the other end of the Ethernet cable from the
PowerBridgeM to the Ethernet port labeled POE on the
PoE Adapter.
2. Connect an Ethernet cable from your LAN or computer to
the Ethernet port labeled LAN on the PoE Adapter.