Ubiquiti Networks PicoStatioM - Manual (Page 4)

2
Bullet ™ M/PicoStation ™ M/NanoStation ™ M/NanoStationloco ™ M
Accessing airOS
1. Make sure that your host machine is connected to the LAN
that is connected to the Ubiquiti device (as shown on the
previous page).
2. Configure the Ethernet adapter on your host system with a
static IP address on the 192.168.1.x subnet (e.g. 192.168.1.100).
3. Launch your web browser. Type https://192.168.1.20 in the
address field and press enter (PC) or return (Mac).
4. Enter ubnt in the Username and Password fields. Select your
country from the Country drop-down. To use the product you
must agree to the terms of use. To do so, click I agree to these
terms of use. Click Login.
Note: The country that the product is being used in
should be selected from the Country drop-down. U.S.
product versions are locked to the U.S. Country Code to
ensure compliance with FCC regulations.
The airOS Configuration Interface will appear, allowing you to
customize your settings as needed.