Hardware installation, Install a ground wire – Ubiquiti Networks airFibe5X User Manual
Page 14
Hardware Installation
Install a Ground Wire
1. Remove the nut from the Ground Bonding Point located on
the back of the AF-5X.
Ground
Bonding
Point
2. Attach a ground wire (min. 10 AWG or 5 mm
2
) to the lug
and replace the nut to secure the wire.
3. At the installation site, secure the other end of the ground
wire to a grounded mast, pole, tower, or grounding bar.
WARNING:
Failure to properly ground your
airFiber radio will void your warranty.
Note:
The ground wire should be as short as
possible and no longer than one meter in length.
*640-00158-02*
640-00158-02