Care and maintenance, Cutter blade maintenance – Dixon ZTR Classic 13639-0702 User Manual
Page 30
30
CARE AND MAINTENANCE
CUTTER BLADE MAINTENANCE:
CAUTION
Stop engine and remove ignition key for safety.
Wear heavy, thick gloves when holding onto
cutter blade. Avoid the sharp edge of the blade.
Blades should be discarded when worn excessively.
DANGEROUS!
DO NOT USE
BLADE IN
THIS CONDITION!
When notch
starts, discard blade
New Blade
Check sharpness of mower blades after every 10 hours of operation.
Observe proper blade position prior to removal.
1.
Safely raise front of mower.
2.
Hold or block blade from turning.
3.
Loosen blade nut and remove blade.
4.
When replacing blade, tighten
blade nut securely. Refer to diagram.
Be sure blade is centered on pilot
before tightening nut to 60 ft. lbs.
See also other documents in the category Dixon Gardening equipment:
- 7000 (40 pages)
- Grizzly ZTR KOH/968999627 (88 pages)
- Speedztr 36 (52 pages)
- 44 (52 pages)
- 36/968999609 (80 pages)
- KODIAK ELS 60 (52 pages)
- SPEEDZTR 42 (52 pages)
- 503 (33 pages)
- 966503601 (60 pages)
- Zeeter 14295-0804 (52 pages)
- SpeedZTR 965882401 (75 pages)
- SpeedZTR 16134-0803 (48 pages)
- RAM MAG 50 / 968999561 (88 pages)
- Kodiak 965871801 (72 pages)
- ZTR Mowers (11 pages)
- ZTR 5423 (70 pages)
- 27 KOH/968999588 (88 pages)
- 17823-0704 (56 pages)
- 700 Series (21 pages)
- 8000G Series (44 pages)
- ZTR 8025 (44 pages)
- ZTR 5502 (72 pages)
- Ram Ultra 966985401 (64 pages)
- 966495401 (72 pages)
- SpeedZTR 46BF (64 pages)
- SpeedZTR 539 131301 (15 pages)
- Kohler 968999725 (72 pages)
- Zeeter 16246-0803 (48 pages)
- Generic (11 pages)
- 3000 Series (38 pages)
- ZTR423 (16 pages)
- TECHNICAL DATA BROCHURE ZTR 361 (8 pages)
- 539130212 (27 pages)
- 1001 (41 pages)
- 72 - 27 KOH (52 pages)
- ZTR 6025 (40 pages)
- 5421 (43 pages)
- SPDZTR 30 BF (60 pages)
- 13089-0601 (60 pages)
- 4500 Series (48 pages)
- SilverTip ZTR 60 (56 pages)
- 502 (36 pages)
- 2000 (40 pages)
- GRIZZLY 60 KOH/968999590 (52 pages)
- D22H46 (30 pages)