Tube Tech CM1A Comp - Manual (Page 2)

Lydkraft ApS
Mose Allé 20, DK 2610 Rødovre
Denmark
CONTROLS:
GAIN: The gain switch has a range from +20dB to +70dB in steps of 10dB/2dB.
LF cut: The high pass filter is selectable between off, 20 Hz 12dB/octave) and
40 Hz (6dB/octave).
Phantom
power:
The phantom power switch switches the +48V DC power on and off.
The +48V DC is supplied to the microphone input via two 6,81 K

resistors.
PAD: This switch places a -20dB attenuation in front of the microphone
transformer.
Impedance: The microphone input impedance can be switched between 600, 1200 or
2400 Ohm
Phase: The phase of the mic input can be reversed 180 degrees.
This does not affect the DI input.
040092