TrakPower DPS 12V 25A Racing Power Supply - Manual (Page 4)

4
Cooling Fan
A built-in cooling fan keeps electronics cool to help maintain optimum
effi ciency and extend the life of the power supply. Never block the intake holes
of the fan, to ensure the power supply will not overheat.
Case
The case is vented to allow easy airfl ow across electronic components to
assist the fan with cooling. The top of the case is fl at to allow chargers and
other devices to be easily stacked on top to free up much needed bench space.
WARNING: ALWAYS have at least one inch of unobstructed area around both
sides and rear of the case for good ventilation to allow the fan to properly cool
the power supply.
Connecting External Devices
Always connect the red (+) positive lead from your charger or other external
device to the red (+) positive terminal on the power supply, and the black
(-) negative lead from your charger or other external device to the black (-)
negative terminal on the power supply.
WARNING: ALWAYS ensure polarity is correct when connecting external
devices to the power supply. Reverse polarity will not damage the power
supply but it may damage the external device. NEVER attempt to connect
batteries directly to the output of the power supply!