Taser X3 - Manual (Page 8)

Step 5: Configure the Deployment Mode
The X3 ECD can be configured for two different deployment modes, Semi-Automatic and
Manual.
To select the deployment mode, follow these steps:
1 Press the selector switch ( ) to activate the MAIN MENU.
2 Press the right ARC ( ) switch until you are at the SYSTEM option in the main menu.
3 Press the left ARC switch.
4 Use the left ARC switch to scroll to the option you want to use.
5 Press the selector switch to go to the previous menu. You now can configure additional
settings. If you are done configuring the ECD, press the selector switch again to exit.
MAIN MENU
SIGHTING
OPTIONS
LANGUAGE
INFO
SYSTEM
MAIN MENU
SIGHTING
OPTIONS
LANGUAGE
INFO
SYSTEM
SYSTEM MENU
MODE
OFF
TRAINING
MANUAL
SYSTEM MENU
MODE
OFF
TRAINING
SEMI_AUTOMATIC