Taser X26 - Manual (Page 12)

12 Chapter 3 Features
Trigger Switch
Unlike a firearm trigger, the X26 ECD trigger is a momentary electrical switch. The switch is operational only
when the safety switch is in the up (ARMED) position. Pulling and releasing the trigger switch will result in an
approximately 5-second discharge unless the safety switch is shifted to the down (SAFE) position during the
discharge. Pulling and holding the trigger switch for more than 5 seconds will result in a continuous discharge
until the trigger switch is released, or the battery is depleted—whichever happens first.
WARNING
In the event of an accidental discharge, immediately move the safety switch to the down (SAFE) position to
stop the discharge cycle.
Trigger Switch
Stainless Steel “Shock” Plates
The sides of the DPM compartment have stainless steel “shock” plates for added strength. Shock plates are
available in silver and black colors.
Textured Grip Zones
The handle of the X26 ECD is optimized for maximum grip in minimal size. Textured grip zones strategically
located in the areas of maximum hand-to-weapon friction offer superior grip and weapon control under stress.
Textured Grip Zones
Textured Grip Zones