Recorder and ecd firmware update, Offline, Recorder and ecd firmware update – offline – Taser CAM-HD User Manual
Page 39

TASER CAM HD Recorder
MMU0036 Rev: B
Page 39 of 48
Recorder and ECD Firmware Update
– Offline
1.
Confirm that the safety on the X2 ECD is in the down (SAFE) position.
2.
Remove the Smart cartridges. (See the TASER X2 ECD User Manual
for more information on unloading Smart cartridges.)
3.
If your TASER CAM HD recorder is not attached to your ECD, firmly
insert the recorder in the X2 ECD until it clicks and the X2 ECD’s ejector
button pops out completely
4.
Start your EVIDENCE Sync software.
5.
Plug the USB download cable into the recorder.