Dometic B2200 - Manual (Page 9)

B1600 - B2200 8 users ‘ instructions
GB
* (only for models equipped with resistance) - **(only for models equipped with light)
1.5.Description of the controls (B2200)
1 general informations
Remote control (B2200)
+
-
MODE
¡$
Clock
Room
Set
REMOTE CONTROL
Clock Display
UP (+)
Down (-)
Reset Button
Room
Temperature
Operation Mode
Display Window
Fan Speed Display
F°/C°
Low Battery
Light
Fan
Mode
ON/OFF
Set Point
CLOCK
TIMER
SET
SLEEP
I FEEL ROOM
F°/C°
LIGHT LIGHT
BUTTON DESCRIPTION
ON/OFF
Press the ON/OFF button to start the airconditioner.
When it’s OFF all the symbols are OFF, except the
clock and you can use the ROOM and the LIGHT
buttons.
F°/C°
F°/C°
Choose the temperature measurement unit between
Celsius (°C) or Fahrenheit (°F).
If temperature is displayed this function is enabled.
LIGHT LIGHT
LIGHT**
Pressing the light key the light on the airconditioner
diffuser is switched on (if equipped) .The light button
works also when the remote control is off.
ROOM
ROOM
Pressing this button the room symbol is displayed
and the local temperature is displayed instead the
set point. Pressing the Room button an other time
the Room symbol disappear and the set point tem-
perature is displayed instead the local one.
This button works also when the remote control is off.
CLOCK
CLOCK
Pressing the “CLOCK” button for a time longer than
2 seconds, it is possible to modify the “TIME SET-
TING”, managing the UP (+) button or the DOWN
(-). Press the “SET” button to confirm the modifica-
tions. After 15 seconds the new set is confirmed in
any cases.
SET
SET
This button has two functions:
1) To confirm the TIME SETTING
2) To resend the actual operating setting
The RESET button erases all the configuration parameters to
default.