Dynex DX-FMDC1 - Manual (Page 6)

6
Specifications
Specifications
Product specifications
Audio specifications
*A weighted
Modulation FM Stereo Modulation
Power 12 V car cigarette lighter socket
Frequencies Full FM band (88.1-107.9 MHz)
Memory 3 Presets
Audio input
connector 3.5 mm audio connector
Non-volatile
memory Remembers previous frequency used
Instant-on Turns on when audio signal detected
Auto-off Turns off 60 seconds after the MP3 player is turned off
Signal format Standard FM stereo format, 38 KHz subcarrier
Frequency
response 15 Hz - 15 kHz
Signal-to-noise
ratio* >55 dB
Total harmonic
distortion 0.25% typical
Stereo
separation >22 dB
Channel
balance +/- 2 dB
DX-FMDC1 - English only.fm Page 6 Tuesday, September 12, 2006 4:45 PM