SkyRC GPS Speed Meter User Manual

Page 2

Users can switch from mode to mode by pressing MODE button.

- 3 -

- 4 -

DIFFERENT MODE SWITCHING

MODE

Time

Current Speed

Peak Speed

Average
Speed

Altitude

Peak Altitude

Trip

GPS Coordinators
(Push twice show
Latitude & Longitude)

After powering on and the ICON of signal is shown on the screen, please use ENTER button to
enter RECORDING mode to log data before you launch your RC trip.The recording process will
be terminated if the ENTER button pressed twice.

DATA LOG RECORDING

Power On the device and connect it to a computer with the USB cable.
Install the software ‘GpsLogger’ which can be download from
http://www.skyrc.com/download/gps/logger.zip

INSTALL ‘GPSLOGGER’ SOFTWARE

It is recommended to use VELCRO or other fastening tape to mount the speed meter onto your
RC cars, planes or helicopters. The GPS antenna can pick up signals through glass and plastic
but will not pick up signals through metal or other conductive surfaces. To avoid interference
with the GPS signal, make sure that the GPS antenna is not covered or shielded by any object
containing metal. Due to this fact, please try to mount the meter on top as possible as you can.

MOUNTING AND PREPARING FOR RC RACING OR FLYING

GPSLOGGER SOFTWARE

7504-0209-01

Transfer the log data to PC and show the track data on Google Earth
Save the log data to PC
Select the language between English and Chinese
Change Metric and Imperial system of measurement
GPS update rate selection
Firmware upgrade

GpsLogger Software Application

ENTER

SPECIFICATIONS

Manufactured by
SKYRC TECHNOLOGY CO., LTD.
www.skyrc.com

You can use SkyRC application software “GpsLogger”to transfer the log data to PC and easily
export the log data to “Google Earth” Please visit Google Earth website
http://earth.google.com for more information.

32 parallel satellite searching channels
Receiver: L1, 1575.42 MHZ
Frequency: 1.023 MHZ
Update frequency: 1 Hz.
Antenna type: Built-in
Satellite signal reception sensitivity: -159dBm

Dimensions: 65.7X39.6X20.8mm
Weight: 41g
Operating temperature: 0℃ to +50℃
Storage temperature: -10℃ to +60℃
Operating humidety: 5% to 90%