Singing Machine iSM1050 - Manual (Page 21)

20
Operation
1 Connect the unit as described
previously. Press the Power On/
Standby button to turn the unit on; the
Power On/Standby indicator will light
blue and the LCD Screen will start up.
2 Connect the external unit to the
VIDEO/AUX in jacks on the rear of this
unit as shown on pages 8 and 9.
Notes:
• It is highly recommended to set the volume
on the auxillary unit to 1/3 or lower to
avoid distortion.
• Skipping files/tracks is not possible when
using an external device.
3 Repeatedly press the FUNCTION
button until the LCD Screen shows
“Aux” to select the Aux mode.
4 Press the MONITOR ON/OFF button to
view the video from the external
device or press again to turn the LCD
Screen off.
5 Connecting an external unit will allow
the audio and video to be played
through your Singing Machine.
6 Adjust the volume to a comfortable
level using the MASTER VOLUME
control.
7 Connect microphone(s) as shown on
page 10, and press the ON/OFF
button on the microphone to power
it off.
Using the AUX Jack
u
x
w
U
V
iSM1050-ENG-SPA v2_Layout 1 7/1/13 10:51 AM Page 20