Delta D28569 - Manual (Page 9)

9- ENG D28569
OPERATING INSTRUCTIONS
BASIC ELEMENTS OF A PRESSURE WASHER
High Pressure Pump: Increases the pressure of the water supply.
Engine: Drives the high pressure pump.
High Pressure Hose: Carries the pressurized water from the pump to the gun
and spray wand.
Spray Gun: Connects with spray wand to control water flow rate, direction, and
pressure.
Quick Connect Spray Wand: Spray wand is equipped with a female quick
connect coupler on the end. This allows the user to quickly change out high-pres-
sure nozzles for different spray patterns and change to the soap nozzle for low
pressure and chemical/soap applications. See How To Use Spray wand paragraph
in this section.
Chemical Hose: Feeds cleaning agents into the pump to mix with the
pressurized water. See How To Apply Chemicals/Cleaning Solvents in Operation
section of this manual.
BASIC ELEMENTS OF ENGINE
Refer to the engine manual for location and operation of engine controls.
Choke Control: Opens and closes carburetor choke valve
Throttle Control Lever: Controls engine speed.
Starter Grip: Pulling starter grip operates recoil starter to crank engine.
Fuel Valve Lever: Opens/closes connection between fuel tank and carburetor.
Engine Switch: Enables and disables ignition system.
READ THIS OPERATION MANUAL AND SAFETY RULES BEFORE OPERATING
YOUR UNIT. Compare the illustrations with your unit to familiarize yourself with
the location of various controls and adjustments. Save this manual for future
reference.
Engine
High
Pressure
Hose
Spray
Gun
Quick
Connect
Spray Wand
Chemical
Hose
High
Pressure
Pump