Directed Electronics 500 User Manual
Page 10
8
© 1999 Directed Electronics, Inc
SPECIFICATIONS
RMS continuous power per channel, All channels
driven into 4 ohms from 20 to 20,000 Hz, with less
than 0.08% Total Harmonic Distortion @ 14.4 VDC
C
RMS continuous power per channel, All channels
driven into 2 ohms from 20 to 20,000 Hz, with less
than 0.1% Total Harmonic Distortion @ 14.4 VDC
RMS continuous power, 2-channel operation, bridged
into 4 ohms from 20 to 20,000 Hz, with less than
0.1% Total Harmonic Distortion @ 14.4 VDC
Dynamic power rating (IHF-202 Standard) bridged
into 4 ohms
model 200 500
35 75
watts
watts
50
120
watts
watts
100
x
2 240
x
2
watts
watts
Signal-to-Noise Ratio
Greater than 95 dB
Frequency Response
20-20,000 Hz ± 0.5 dB
Damping Factor @ 4 ohm
Greater than 200
Crossover
Switchable high or low pass
12 dB/octave, continuously
variable from 50 to 500Hz
Bass Equalization
+8 dB, centered at 40Hz
(model 500 only)
Input Impedance
20K ohms
Input Sensitivity
Variable from 150 mV to 8 volt
Output Impedance
2 to 8 ohms, stereo
4 to 8 ohms, bridged
Supply Voltage
10 to 16 VDC
Fusing and Power
25A 50A
Cable Requirements (AWG)
#12 #8
(Per amp, trunk mounted)
250 600
watts
watts