Simaudio 880M Amplifier - Manual (Page 11)

880M Reference Mono Power Amplifier
____________________________________________________________________________________
11
Remote Operation
Figure 3: Remote Operation with 12V Trigger
In figure 3 we have a 850P Preamplifier and a pair
of 880M amplifiers connected together via their
respective 12V triggers; The 12V trigger output on
the 850P is connected to the 12V trigger input on
the top 880M (using a 1/8” mini-jack cable). The
12V trigger output from this 880M connects to the
12V trigger input on the bottom 880M (also using a
1/8” mini-jack cable). When you turn on the 850P
via remote control (or its Standby button), both
880M’s will turn on automatically. The same rule
applies when you put the 850P into Standby mode.
Figure 4: Remote Operation with 12V Trigger
In figure 4 we have a 850P Preamplifier and a pair
of 880M amplifiers. Each of the two 12V trigger
outputs on the 850P are connected to the 12V
trigger inputs on each 880M (using a 1/8” mini-jack
cable). When you turn on the 850P via remote
control (or its Standby button), both 880M’s will
turn on automatically. The same rule applies when
you put the 850P into Standby mode.