Ruark Audio R1 (mk3) - Manual (Page 14)

EN-14
DAB radio*
Your R1 radio receives DAB / DAB+ digital radio and
displays information about the station and programme
being broadcast.
Press SOURCE and rotate the CONTROL KNOB or
repeatedly press SOURCE until DAB radio is displayed,
then press the knob to select it.
The fi rst time you use your R1, or if the station list is
empty, it will automatically perform a full scan to fi nd
what stations are available.
Change station
Press or to show the station list. Pressing it again
shows the next or previous station, to tune to a station,
select it by pressing the CONTROL KNOB.
If you do not select the station by pressing the knob
your radio will return to the current station.
Once the station list is displayed, you can scroll through
the list by rotating the CONTROL KNOB and selecting a
station by pressing the knob.
You can also show the station list by selecting MENU >
Station list.
DAB radio text (DLS)
DLS (Dynamic Label Segment) is information broadcast
by the station. Each time you press INFO, the next set
of information is displayed, cycling through radio text,
programme type, signal strength, signal format and date.
Save preset
You can store 10 DAB stations in your preset list. See
‘Common functions and system settings’ section.
Recall preset
‘See Common functions and system settings’ section.
* excludes R1 mk3/US version