ROHO Retrobac System - Manual (Page 4)

A. Cover: The cover consists of a front foam section and a back clip section. The top
has a three section Velcro ® enclosure. The front material is 100% water resistant nylon
and the sides are 100% polyester knit spacer fabric. The back and the section divider
are 100% polyurethane coated nylon knitted fabric.
B. Foam Pad: Provides additional support to the user's pelvis & trunk. Made of
polyurethane foam.
C. Back Clip: Chrome plated steel clip. A handle near the top aids in removal of the
Retroback from the wheelchair.
D. Snaps: Holds back clip in place.
E. Operations Manual: Instructions on Retroback attachment, care and other
important information.
F. Product Registration Card: Complete product registration card and mail to
ROHO, Inc. or register online at www.therohogroup.com.
PARTS DETAIL
Item Numbers Retroback Cover & Foam Pad Fits Wheelchair Fits Wheelchair
Size (Width x Height x Depth) Widths* Heights
min. max. min. max.
RETRO16C 13 in. x 14 in. x 1.5 in. 15 in. 16 in. 16 in. 18 in.
(33.0 cm x 35.5 cm x 4.0 cm) (38.0 cm) (40.5 cm) (40.5 cm) (45.5 cm)
RETRO18C 15 in. x 14 in. x 1.5 in. 17 in. 18 in. 16 in. 18 in.
(38.0 cm x 35.5 cm x 4.0 cm) (43.0 cm) (45.5 cm) (40.5 cm) (45.5 cm)
RETRO20C 17 in. x 14 in. x 1.5 in 19 in. 20 in. 16 in. 18 in.
(43.0 cm x 35.5 cm x 4.0 cm) (48.5 cm) (51.0 cm) (40.5 cm) (45.5 cm)
* All measurements taken are from outside of back post to outside of back post.
The average weight of an assembled Retroback is 3 lbs. (1.4 kg).
2
Product
Registration Card
A.
B.
C.
D.
E.
F.
Sizing Table