Rocktron Cyborg Delay - Manual (Page 14)

The top line in the LED display is the TAP BUTTON. As described in (point 9)
of the description section of this manual, this line indicates the tap parameter
available on each preset when using the TAP/STORE footswitch to determine the
delay time. Please note that the tap parameters are only available on the selected
preset.
The next line down is the TIME CONTROL line. This line indicates the
available DELAY TIME on each preset. Here is a description of each preset and
the parameters available:
Tap Button and Time Control
Preset 1 has an 1/8 note tap parameter. This parameter measures one
half of the time between taps. The Delay time available on this preset is
0ms-500ms.
Preset 2 has a Triplet tap parameter. This parameter measures two-
thirds of the time between taps. The Delay time available on this preset
is 0ms-666ms.
Preset 3 has a 1/4 note tap parameter. This parameter is equal to the
time between taps. The Delay time available on this preset is 0ms-1
second.
Preset 4 has a 1/2 note tap parameter. This parameter is equal to two
times the amount of time between taps. The Delay time available on
this preset is 0ms-1 second.
LED Display...continued...