Rocktron Intellifex LTD - Manual (Page 19)

16
Pan 1 and Pan 2
This allows for the panning of each delay to the left or right output, if desired.
The Pan parameter is adjustable from 0 to 100 - where 0 = full left, 100 = full
right and 50 = center.
Dly Time 1 and Dly Time 2
These parameters determine the amount of time after a signal is input that the
delayed signal will begin to reproduce the input signal.
Regen 1 and Regen 2
This parameter is provided for each delay and determines the number of times
the delayed signal will repeat itself. This is achieved by feeding the delayed
output back into the input. Higher levels of regeneration will result in more
repeats.
D Type
The Delay Type parameter determines whether the Stereo, Ping-Pong or 2-Tap
delay type is currently active.
Dl Hf Damp
Delay High Frequency Damping determines the amount of high frequency
content in the delayed and regenerated signals. Higher amounts of damping
will result in less high frequency information in the delayed signal.