Rocktron Utopia G200 User Manual

Page 60

Any or all of the G200's presets may be dumped to another G200, a sequencer or MIDI utility program

using a PC MIDI interface to create a ( .syx ) ﬁle. This ﬁle may be uploaded to the Rocktron website to

share with other users. All the information about the presets you have created will be dumped consist-

ing of parameter values, title characters and controller assignments. When dumping a single preset into

another G200, the dumped preset can be loaded into any preset location on the receiving unit.

Note: The G200 MIDI data when sent by external means such as a PC MIDI utility program you will

need to conﬁgure it as stated below.

Buffer size 264 bytes

No of buffers 16 both RX and TX

100ms between buffers be used initially as a starting point.

100ms after F7 [ optional ]

If a Midi sequencer is used to store the data record the Sysex data in real-time or adhere to the param-

eters given above.

8. MIDI DUMP/LOAD

Step 2

Step 3

M I D I D U M P / L O A D

1 8 P R E D U M P / L O A D

Step 1

Connect a standard MIDI cable from the MIDI OUT of the transmitting G200 to the

MIDI IN of the receiving G200. Consult MIDI Connection drawing for more infor-

mation

If you are dumping a single preset to another G200, the transmitting G200 must have

that preset selected.

Turn FUNCTION SELECT knob to MIDI DUMP/LOAD.

Step 4

On the receiving G200 use the PRESET Select control to select the preset location

where the received preset will be stored. Note that the preset currently stored at the

selected location will be lost when the new preset is received.