Rocktron Reaction Chorus - Manual (Page 5)

For the best result, place the Reaction Chorus after
your distortion in the signal chain. If you are using
multiple stomp boxes, place the Reaction Chorus after
your distortion. When using a variety of pedals, such
as delays and other modulation effects, try the Reaction
Chorus in different parts of the signal chain until you
find a sound that works best for you.
If your amp has an effects loop, try putting the chorus
in the effects loop for a different sound; (just follow the
instructions in your amplifier manual when connecting
to your effects loop).
The footswitch on the Reaction Chorus controls On/
Off status as shown by the LED indicator. Reaction
stomp boxes run on a 9V Alkaline battery, or may also
be powered by Rocktron’s DC OnTap Universal Power
Supply adaptor.
Introduction continued.....