Rocktron Unity Tuner - Manual (Page 11)

Tuning Instructions - STROBE:
The STROBE function of the UNITY Tuner is extremely senstive.
Step 1 - plug the guitar/bass into the tuner and press the “STROBE” button. At
this point the RED LEDs will appear to rotate counter clockwise.
Step 2 - play a note on your guitar. Pluck your E string, if needed, adjust your
tuning machine on your instrument until the letter “E” appears in the NOTE
Display window.
Step 3 - if your note is flat - the red LEDs will appear to be rotating counter
clockwise, showing you that the note being played is flat. The faster the LEDs
rotate counter clockwise, the more flat the tuning is. Tune your string up. Dur-
ing this process the rotation of the LEDs will appear to slow down as you ap-
proach being in tune. When the LEDs don’t appear to be rotating and the green
IN TUNE LED lights, then the note is in tune.
Step 4 - if your note is sharp - the red LEDs will appear to be rotating clock-
wise, showing you that the note being played is sharp. The faster the LEDs
rotate clockwise, the more sharp the tuning is. Tune your string down. During
this process the rotation of the LEDs will appear to slow down as you approach
being in tune. When the LEDs don’t appear to be rotating and the green IN
TUNE LED lights, then the note is in tune.
Step 5 - Continue with step 3 or step 4 until the flat or sharp LEDs don’t appear
to be rotating and the green “IN TUNE” LED lights. At this point the string is
in tune.
Step 6 - Continue steps 2-5 but using your other strings on your guitar or bass.