Rocktron Cottonmouth Fuzz - Manual (Page 11)

How to change the battery:
To change the battery, turn the pedal over and
remove the 4 screws on the bottom. Remove the
back cover. Carefully remove the old battery and
replace it with a new 9V Alkaline battery. Replace
battery in the same area as the old battery was
located. Place the back cover on the pedal and re-
insert the screws.
Save yourself tons of money in batteries by using
the Rocktron DC OnTap Universal Power Supply
to power this pedal (sold seperately). The Rock-
tron DC OnTap provides a constant flow of power
to the pedal, unlike a battery that will degrade over
time. The Rocktron DC OnTap Univeral Power
Supply can also power up to 20 pedals and can be
used with both 110V and 220V power sources.
Check, www.rocktron.com for more information
on the DC OnTap and where to purchase.