Rocktron Third Angel Distortion - Manual (Page 6)

Descriptions continued.........
BASS Control - This control determines the low-end bass EQ.
TREBLE Control -This control determines the high-end treble EQ.
9VDC Input - This input jack provides 9VDC power to the pedal from
the Rocktron DC OnTap 9V power supply (sold seperately).
LEVEL Control - This control determines the overall volume of the
effect.
ON/OFF Led - This LED shows if the pedal is on or off. When the
LED is light the pedal is on. When the LED is not light the pedal is
off.
UNRIGHTEOUS Control - This control determines distortion wave-
form symmetry and definition.
DECEIVE Control - This control determines the amount of gain or
distortion.
INPUT Jack - Using a standard 1/4” guitar cable, plug your guitar into
this jack.
OUTPUT Jack - This jack provides the output of the pedal. Use a 1/4”
guitar cable to plug into the next pedal or into a guitar amplifier.
FOOTSWITCH - Use this switch to turn on or off the pedal. The On/
Off Led will show you if the pedal is on or off.
1
2
3
4
5
6
7
8
9
10