Rocktron Velocity VT60 - Manual (Page 6)

3
The BASS control determines the amount of low frequency information in the
Distortion channel, and is adjustable over a range of ±15dB.
The MID control determines the amount of mid frequency information in the
Distortion channel, and is adjustable over a range of ±15dB.
The MID FREQ control determies the center frequency to be cut or boosted by
the MID control, and is adjustable over a range of 350Hz to 6kHz.
The TREBLE control determines the amount of high frequency information in the
Distortion channel, and is adjustable over a range of ±15dB.
The GAIN control determines the amount of gain in the Distortion channel.
Higher levels of gain increase distortion and sustain.
The LEVEL control determines the output level of the Distortion channel, inde-
pendent of the Clean channel.
When lit, the DISTORTION L.E.D. indicates that the Distortion channel is
currently active.
9 BASS control
10 MID control
11 MID FREQ control
12 TREBLE control
13 GAIN
14 LEVEL control
15 DISORTION LED
16 HUSH control
17 VOLUME control
18 INPUT jack
The HUSH ® control determines the threshold level for the internal HUSH® noise
reduction. For an explanation of HUSH and how it operates, see page 5.
The VOLUME control determines the overall output level of the VT60.
This ¼" mono jack accepts the output from a guitar.
DISTORTION Channel Controls