Rocktron Velocity 300 - Manual (Page 12)

12 13
We recommend that you use an authorized repair person to change the fuse in this unit.
To access the fuse, first power down the unit and unplug the cable from the wall outlet and the
amplifier. Using a small screw driver, open the fuse tray by prying open the small tab as shown in the
drawing above.
Please note that the tray may not come all of the way out.
Remove the old fuse and replace with a comparable new fuse and close the tray being sure that the
tray snaps into position.
9. Fuse Replacement
Output Power
(Unbridged)
(Bridged)
Input Sensitivity
Maximum Input Level
Maximum Output Level
Maximum Gain
Noise Floor
Dynamic Range
Distortion
(Typical)
Frequency Response
Current Consumption
Dimensions
Weight
150 watts per channel @ 4 ohms (both channel driven)
75 watts per channel @ 8 ohms (both channels driven)
37.5 watts per channel @ 16ohms (both channels driven)
300 watts @ 8 ohms
170 watts @ 16 ohms
-7.3dBu (0.335V RMS), 4W stereo for rated output at max. gain
23dBu (10.95V RMS), input stage clip point
35dBu (4W bridged)
36dB
-75dBu typical (referenced to 1 watt)
95dB
0.1% THD
20Hz - 20KHz, +0/-3dB
5 amps @115VAC max. (575 watts)
19"x 1 3/4" x 9 1/2"
483mm x 44mm x 241mm
7.5lbs
3.40kg
10. Specifications
Note: 0dBv = 0.775V RMS
CE Approved