Rocktron HUSH Ultra - Manual (Page 22)

22
PRESET MAPPING Function
The Preset Mapping function allows you to use a MIDI Controller to recall
different presets via program changes.
MIDI RECEIVED PROGRAM CHANGE number is on the left side of the screen.
The PRESET that will be recalled is on the right side of the screen.
Note: PRESET MAP in the GLOBAL FUNCTION must be set to ON for mapping
to be active.
PRESET MAPPING
MIDI DUMP/LOAD Function
This function allows you to dump 1 preset from one HUSH Ultra to a second
HUSH Ultra or a MIDI sequencer device.
This function allows you to dump "ALL" presets from one HUSH Ultra to a
second HUSH Ultra or MIDI sequencer device
1 PR DUMP/LOAD
BULK DUMP/LOAD