Rocktron VooDu Valve - Manual (Page 33)

31
The SOURCE 2 parameter is used to select whether the Source 2 input
will be the VOICE 2 output from the previous effect in the signal chain
or the direct signal (DIR).
The DELAY HIGH FREQUENCY DAMPING parameter controls the
amount of high frequency content in the delayed and regenerated
signals. Higher amounts of damping will result in less high frequency
information in the delayed signal.
The OUTPUT LEVEL 1 parameter determines the volume of Delay 1
in relation to Delay 2.
The PAN 1 parameter allows you to pan the Delay 1 signal to the left or
right channel.
The DELAY TIME 1 parameter determines the length of time (in
milliseconds) after the input signal that the Delay 1 signal will begin.
The DELAY TIME can be adjusted via the ADJUST control, MIDI
controller changes or via the Tap Delay feature (see "Operating the
Voodu Valve" for detailed descriptions of each).
SOURCE 2
DLY HF DAMP
OUT LEVEL 1
PAN 1
DLY TIME 1