RAVE Sports Cosmic Slide Pool Slide - Manual (Page 6)

AirLock Valve - Unscrew the large AirLock valve to quickly deflate the main
chamber. Then place the deflation portion of the inflation/deflation device
on top of the valve and remove all air. You will know you have all the air out
when the unit is flat and wrinkled. Replace valve.
Stem Valves - Insert the deflation portion of the inflation/deflation device
with the appropriate attachment connector. You may also gently squeeze the
base of the valve to release air. You will know you have all the air out when
the unit is flat and wrinkled. Replace plug.
Water Valves – Remove water from the Aqua Anchors (Slides only). Remove
the cap and squeeze all the water out. A very small amount of water
remaining in the chamber will not harm the unit. Keep in mind though that
water left inside for a period of time may start to mold.
Completely Dry Unit. Wipe the product off with a terry cloth towel and
allow to dry completely. Store for next use. See Storage Section for details.
5