RAVE Sports Outback Inflatable SUP Board - Manual (Page 6)

• Inflate SUP board to 10-12 psi. (DO NOT GO OVER 14 PSI)
3. Attach Fins
• Attachment of fins can be done before or
after the inflation process.
• Insert front of fin into slot and pull backwards
to hook in place
• Secure with screws.
Properly Holding the Paddle
Blade should be facing forward for Performance SUP paddle..
Using the Board
• Start on your knees and push up to feet
while centered on the board.
• Feet should be shoulder width apart
with bent knees.
• Face forward with shoulders back.
• Hold paddle at the T-Handle and
approximately 2 feet down on the shaft.
• To turn on the SUP board, paddle on
the opposite side you desire to turn.
Deflation
1. Remove fins from bottom of board.
2. Open valve to release air.
6