RAVE Sports Bongo 15 Bouncer Water Park - Manual (Page 4)

IMPORTANT:
With all ends of the harness ropes securely fastened to the proper rings on
the tube, ensure the nylon glide is free to slide smoothly along the long rope
and none of the ropes are crossed or tangled.
Recommendation
For simple installation year after year, it is recommended to mark each
attachment position. Under each attachment point, use a permanent
marker to mark the location on the inflatable tube where each rope is
clipped by marking L for long rope and S for short rope. This will assist you
in attaching the harness in the future, and the marks will be hidden when
the trampoline is fully assembled.
Inspect the nylon glide periodically to ensure it is sliding freely along the
long rope. Remove weeds, foliage, or tangles that may prevent the glide
from sliding properly. This movement of the glide along the rope is
necessary to maintain equal tension on the harness ropes and helps prevent
flipping of your trampoline in high winds.
Also inspect the stainless steel swivel periodically to ensure it is free to
rotate. This is critical to prevent twisting and damage to your anchor rope.
Inspect the entire Anchor Harness each year before attaching, and replace it
if necessary.
The following conditions could result in potential hazards or damage to your
product:
Attach anchor
line here
3