Proctor-Silex Ergonomic Can Opener (white)-75224RY - Manual (Page 4)

4
1. Place can opener on level surface.
2. Plug icord into electrical outlet.
3. Raise removable lever up.
4. Place rim of can firmly under can guide and against geared
wheel.
5. Tilt top of can in, to position the cutting blade on inside rim
of can.
6. Press removable lever all the way down.
7. The motor will begin turning can and cutting lid. (It is not
necessary to hold the remvable lever down or to hold the
can during the cutting action.
8. The motor will automatically stop when the can is open.
Using Your Can Opener
• The can opener will easily open all standard size cans.
• On some models it will be necessary to position can opener at
edge of counter, allowing for clearance to open cans taller than
the can opener.
• If there is a bump, dent, or heavy seam in the rim of the can,
open the other end of the can or start cutter just beyond it.
• Cans made with aluminum lids will not adhere to the magnet.
• The motor of your can opener is permanently lubricated and
will not require oiling.
• To use the cord storage on the back of the opener, push in or
pull out cord as needed.
Tips for Best Use