POP ART toaster The Stupid Toaster/4 Stencils - Manual (Page 3)

 This appliance has a polarized plug (one blade is wider than the other). To
reduce the risk of electric shock, this plug is intended to fit into a polarized
outlet only one way. If the plug does not fit fully into the outlet, reverse the
plug. If it still does not fit, contact a qualified electrician. Do not attempt to
modify the plug in any way.
 Do not operate any appliance with a damaged cord or plug or after the
appliance malfunctions or has been damaged in any manner. Return appliance
to the nearest authorized service facility for examination, repair, or adjustment
 The use of accessory attachments not recommended by the appliance
manufacturer may cause product failure or injuries.
 Do not let cord hang over edge of table or counter, or touch hot surfaces.
 Do not place on or near a hot gas or electric burner, or in a heated oven.
 Do not use appliance for other than intended use.
 Avoid contacting moving parts.
PLEASE KEEP THESE INSTRUCTIONS
Note this appliance is intended for household use only.
MAIN COMPONENTS
A. start control
B. frozen
C. reheat
D. cancel
E. timing/heat control
F. removable metal image plate
G. hook
H. crumb tray
OPERATION
 Place your toaster on a flat, dry, stable surface.
 Place one metal image plate into each bread slot.
a) the back of the image plate will face the inner wall of toaster.
b) the front of the image plate will face the bread
c) using the handle at top of plate, gently slide the plate into the metal
guides and press down firmly
 Plug the toaster in, and adjust it to your required toasting time, using the
Timing/heat setting control (E)
 Place bread or other food suitable for toasting into the slot, then press down
the start control /plunger (A). It will remain down until the bread is toasted.