PocketBook SURFpad U7 - Manual (Page 14)

GETTING STARTED
14
ESTABLISHING WI-FI
If you skipped Wi-Fi configuration during the initial setup, you can
configure it later.
1. Go to Settings > Wireless & networks . Check Wi-Fi checkbox
2. The list of available networks will be displayed.
3. The Device automatically detects security type, and if there’s no
need to specify additional data (e.g. pre-shared key), connection
would be established.
4. Otherwise, you need to specify password and other security set-
tings (if required) manually.
You can read about advanced network configuration in the Wi-Fi Con-
nection chapter of the current User Manual.
OTG-CABLE USAGE
You can connect external devices, such as keyboard or USB flash disk,
using OTG cable (not included to the package). To connect the device,
plug an OTG-cable into micro-USB port of the Device, and connect
an external device to other side.
After connecting a keyboard, it will be detected automatically and
you will be able to use for typing. Settings for external keyboard will
be available in Settings > Language & input . From there you can en-
able/disable misspelling autocorrection, autocapitalization, set the
layout switch keys combinations and select layouts will be used.
After connecting a flash disk, you’ll be able to view its content in
usbdisk folder, using the File Manager.
In section Settings > Storage > EXTSD you can view information about
total and free memory on the storage, unmount it for safe ejection
or format it.
ATTENTION! Formatting a storage will totally erase all data on it!