PocketBook SURFpad 3 (10,1") - Manual (Page 13)

GETTING STARTED
13
ESTABLISHING WI-FI
If you skipped Wi-Fi configuration during the initial setup, you can con-
figure it later.
1. Go to Settings > Wireless & networks . Check Wi-Fi checkbox
2. The list of available networks will be displayed.
3. The Device automatically detects security type, and if there’s no need
to specify additional data (e.g. pre-shared key), connection would be
established.
4. Otherwise, you need to specify password and other security settings
(if required) manually.
You can read about advanced network configuration in the Wi-Fi Con-
nection chapter of the current User Manual.
INSERTING MICRO SD CARD
The Device already has 16 GB of internal storage, but you can extend it
by using micro SD card.
Insert it to the slot, like it
shown on a figure, and
slightly push until card
will be fixed.
ATTENTION! Before eject-
ing microSD card either turn
the Device off or unmount it:
go to
Settings > Storage set-
tings > Unmount SD card . Otherwise the data stored on microSD card might be
damaged.
To eject the card, slightly press on its edge until it will be unfixed, and
pull it to get.
ATTENTION! If your SD card or SIM card get stuck, do not try to eject it by your-
self, and immediately call Customer Support.