PocketBook InkPad User Manual
Page 23
Getting Started
23
•
Simple (WEP)
– after you select this option,
you will need to specify
WEP
Authentication type
–
Open System
or
Shared Key
either. The Device can-
not recognize authentication type automatically;
•
WPA/WPA2 Enterprise
– you will need to spec-
ify username, password and domain (if necessary);
•
WPA/WPA2 PSK
– you will need to enter net-
work key (up to 64 symbols).
5. Open
Advanced settings
. Select the idle time be-
fore disconnection in the corresponding section.
6. If it is needed to configure network settings man-
ually, go to
Advanced settings
, and change
IP address
configuration
:
•
DHCP
— get IS address automatically (if DHCS
server is configured);
•
Manual
(for skilled users) — enter networks pa-
rameters manually from the on-screen keyboard.