PocketBook Sense with KENZO cover - Manual (Page 23)

Getting Started 23
NOTE If there are no available networks or the signal strength is
week, Available networks are not displayed and instead replaced
by Scanning — searching for available networks.
3. To set up connection with a hidden network, open
Connection to a hidden network and enter its SSID from
the on-screen keyboard in the Network name (SSID) field.
4. Select security type in the corresponding list:
• None – for an open network;
• Simple (WEP) – after you select this option,
you will need to specify WEP Authentication type –
Open System or Shared Key either. The Device can-
not recognize authentication type automatically;
• WPA/WPA2 Enterprise – you will need to spec-
ify username, password and domain (if necessary);
• WPA/WPA2 PSK – you will need to enter net-
work key (up to 64 symbols).
5. Open Advanced settings . Select the idle time be-
fore disconnection in the corresponding section.