Physitemp Instruments BFS-30VT - Manual (Page 8)

7. Specifications
Controller Specifications
Size: 7½ inches W x 10 inches D x 4 ½ inches H
Weight: 5 pounds
Power Requirements: 110-120VAC @ 4 Amps or
220-240 VAC @ 2 Amps Factory set
Grounded Outlet
Operating Range: -10 degrees to Ambient Centigrade
Controller Resolution: 0.1 degrees Centigrade
Display: Dual display of set and run Temp.
In 7mm high led digits
Control Accuracy: + or - 0.2 degrees Centigrade
Power Output to cooling stage: 12 Volts DC @ 10 Amps
Feedback Sensor: 100 ohm Platinum RTD
Safety Features: Power shutoff during overtemperature
condition caused by inadequate coolant flow
(50 degrees C )
Auxiliary AC Outlet: Switched AC Power outlet for PTU-3
or ECV-1
Refrigeration Module Specifications
Size (including bath): 4 3/4” wide x 4 1/2” x 2” thick
Weight: 2. 5 pounds
Temperature Range: Ambient to -10 degrees Centigrade
Cooling Capacity: 120 watts
Nominal operating Voltage: 12 VDC
Nominal operating Current: 10 Amps
8