Peg-Perego Viaggio HBB 120 - Manual (Page 18)

18
Installing the booster seat in the vehicle Installing the booster seat in the vehicle
1. Lean the booster seat
on the selected vehicle
seat in forward facing
mode.
IMPORTANT! For proper
head support, this
booster seat needs
to be installed in a
vehicle seating position
equipped with a
headrest.
2. Primo Viaggio HBB120
is equipped with LATCH
connectors to be used
with your vehicle’s lower
anchors.
Connectors are stored in
the back side of the seat.
To use the connectors,
push the central adjuster
in the front of the seat and
pull the connectors by
hand out of the housing
at the same time.
3. Attach the connectors
to the vehicle’s lower
anchors. An audible click
is heard when the product
is attached to the lower
anchors. Pull the central
strap (b) and push the
booster seat against the
seat (c). Check that the
booster seat is attached
by moving it sideways.
Attaching the booster seat
with LATCH connectors to
the vehicle seat means
that it is possible to leave
it in place even when not
occupied.
4. To detach the booster
seat, push on the central
adjuster to release the
booster seat and move it
away from the vehicle seat.
Expose the connectors
red button and push the